The submerged slurry pump is a single-stage, single suction cantilever structure, which uses a bearing seat and a support seat to connect the hydraulic components of the pump. The liquid is discharged from the outlet pipe components. The impeller of the pump is a semi open impeller, and a mixing blade is set at the inlet extension of the impeller blade. The primary feature of the pump is that the pump shaft at the submerged part has sufficient stiffness. There is no bearing between the impeller and the pump shell, and no shaft seal is used, It can transport media rich in fixed particles with large concentration.

The length of the pump penetrating into the liquid is between 800-2000. If required, it can be equipped with a suction pipe. The shaft seal adopts a larger pump to penetrate into the liquid for operation without shaft seal. The transmission is installed on the motor support and support seat by a vertical motor, and connected with the pump by a coupling.

Szbl type submerged slurry pump, SZL type submerged slurry pump is a vertical single-stage single suction cantilever centrifugal pump structure, the impeller is a semi open impeller, and mixing blades are set at the extension of the impeller suction side.